Saturday, February 20, 2010

bike

How to Troubleshoot an Exercise Bike

Introduction

Stationary bikes are a type of exercise equipment. They are easily maintained and tend to have fewer problems when kept clean and lubricated. It is not difficult to spot and fix problems with your stationary bike. Stationary bikes sustain fewer problems than regular bicycles because they remain indoors and are not subject to outdoor conditions. Every stationary bike model is different so refer to your owner’s manual for instructions on how to fix issues with your specific bike.

Difficulty: Moderately Easy

Things You'll Need:

- Cleaners and lubricant

- New hub

- Rotating brush chain cleaning tool

- New pedals

- Pedal wrench

- Fine-grit sandpaper

Instructions

Step 1

Clean and lubricate the gears that control the resistance/intensity mechanism of the stationary bike. This will fix bikes that do not change intensity settings easily. Follow manufacturer instructions to be sure that you fix this problem properly.

Step 2

Check for a wobbly resistance wheel. If your bike has this issue, replace the bike’s hub. You can change the hub by loosening the resistance machinery and removing the wheel and the hub bolt. You can then take off the old hub and put in a new one. Put the hub bolt and wheel back into place and tighten the resistance mechanism.

Step 3

Keep the chain clean. A dirty and dry chain is noisy and makes the bike hard to ride. Use a rotating brush chain cleaning tool to clean the chain.

Step 4

Replace won pedals. Change the pedals when they are not at 90 degrees to the crankarm. You should also change the pedals if you feel a bump in the pedal stroke. Remove the pedals with a pedal wrench and put new ones in their place.

Step 5

Remove your handlebars and seat and clean them well. Use fine-grit sandpaper on mating surfaces to build up the grip. This step will help the handlebars and seat not move around while you are riding your bike.

Tip

Keep your bike clean to avoid having to make future repairs.

garage sensors

How to Troubleshoot Garage Door Safety Sensors

Introduction

Garage door safety sensors monitor the operation of your garage door. They make sure that the door will not close while a person is under it. These sensors keep kids, pets, and distracted adults from getting hurt by a closing garage door. The sensors can be damaged by water and dirt or by hit. Find the source of the garage door safety sensor’s malfunction can be irritating but the problem can usually be fixed easily.

Difficulty: Moderately Easy

Things You'll Need:

- Brackets

- Wire

- New sensors

Instructions

Step 1

Check the sensors for anything that could be stopping them from seeing their pair. Look carefully at the lens. Make sure there is no dirt or debris on the lens.

Step 2

Verify that the sensors are lined up correctly. You may need to tighten the brackets that keep the sensors in their places. It is possible that you will need to completely replace the brackets.

Step 3

Confirm that the unit is on. Be sure that the sensors are receiving electricity. Check the main unit’s power if you see that the sensors’ lights are not on.

Step 4

Inspect the wires that lead to the sensors. Make sure that the connections are all secure. Install new wires if the current ones are damaged or frayed.

Step 5

Expose the inside of the sensor units and verify that the wires inside are attached properly. Make sure that there isn’t anything that doesn’t belong inside the sensor unit. Also check that the sensor units are dry inside.

Step 6

Replace the units. Only complete this step if none of the other steps have yielded positive results. If replacing the units does not fix the sensors, have a repairman/electrician come and look at the circuit board in the main unit.

Tip

Check the sensor packing for further instructions.

Warning

Be careful when working on the sensors because the sensor will not working to keep the garage door open.

Garage Door Zone: Liftmaster Garage Door Safety Sensors http://garagedoorzone.blogspot.com/2008/12/liftmaster-garage-door-safety-sensors.html

heater

How to Install Gas Space Heaters Tips

Introduction

Gas space heaters are very useful. They can provide extra heat on very cold days and they can be counted on during power outages. Gas space heaters can help you save money because they run on gas, a cheaper energy source than electricity. Be sure to use your heater in a well ventilated room. Follow all of the manufacturer’s instructions when installing your gas heater and be sure to adhere to any of your town’s building codes.

Difficulty: Moderately Difficult

Things You'll Need:

- Stud finder

- Piping

- Thread sealant

- Pressure gauge

- Spray bottle filled with dish soap and water

Instructions

Step 1

Buy a heater. Do not purchase a heater that is too big for the room you will be placing it in. Check the heater’s box for a sizing table or ask a sales assistant at the store for their help.

Step 2

Check that there will be plenty of fresh air and ventilation in the room that will house the space heater. Put the heater in a room that has windows. Keep the windows open about half an inch when running the heater.

Step 3

Place the heater on an even surface. The heater needs to be out of pedestrian’s way. Keep heaters away from curtains, walls, decorations, and furniture. Put the heater close to an outlet because most heaters need to be plugged in.

Step 4

Use a stud-finder to search the wall for a stud or check the floor for a joist. Attach the mounting brackets that came with the heater to the stud or floor joist.

Step 5

Shut off your gas supply. Find piping in your basement or a crawl space. Install gas supply piping by “T”ing into the existing piping. Install a shut-off valve and sediment drain into the piping. Apply a small amount of pipe thread sealant to the pipe. Use a sealant that works with your fuel type. Check that the pressure coming from your gas supply is not too high using a pressure gauge.

Step 6

Inspect the new piping for leaks by spraying a mixture of dish soap and water onto each joint. If you spot growing bubbles on a joint, you will find a leak in that location. The leak needs to be sealed.

Step 7

Attach your heater to the gas piping while the heater is off. Check the pipes for leaks again. You may want a building inspector to do a final check of the heater and the piping before you use your new heater.

Tips

Shut the door to the room that the heater is in to keep the room warm.

Purchase a heater that has all the current safety features such as the ability to turn itself off if it gets knocked over. You will know that the heater’s safety features are up to date if you see the Underwriter’s Laboratory (UL) label on the heater.

Warnings

Badly crafted or operated heaters can cause fires so be very careful when using a gas space heater.

Never leave a heater on while you leave the room or go to sleep.

New York State Department of Health: Supplemental Space Heaters

http://www.health.state.ny.us/environmental/indoors/heaters/

Wednesday, February 17, 2010

repo car

How to Find Repossessed Vehicles to Buy

Introduction

Repossessed cars are no longer all that hard to find. Newspapers and web searches will turn up a number of results. Repo cars are usually cars that were impounded by the police or collected by the bank from people who couldn’t pay their loans back. Repossessed cars are sold at reduced prices so they can be in demand. Repo cars can be sold by public banks or in private auctions. Just be careful to inspect the car well so that you do not get ripped off.

Difficulty: Easy

Instructions

Step 1

Locate cars that have been repossessed before they are given over to be sold at a public auction or sale. Try calling your local banks or credit union. Often they can give you a recent list of cars that were repossessed.

Step 2

Check the newspaper, websites, and the phone book for repo cars. Try looking in the newspaper under the auto classifieds column for public auctions. Search the eBay motors site for cheap repo cars.

Step 3

Figure out how you are going to pay for the car. Repo car sellers want to complete sales quickly so you need to have either proper financing, cash, or certified funds easily accessible. Apply to be approved from your bank or credit union before you try to buy a car.

Step 4

Look up how much a repo car should cost in the model that you want. You can find this information in the NADA Guide or the Kelley Blue Book. Repo cars should be much cheaper than new cars.

Step 5

Examine in person the car that you have chosen. Check its mileage. Get a vehicle history report from Car Fax or Auto Check so you can see whether the car has been in an accident or not. You should also take the car to be checked by a mechanic. If everything checks out, purchase the car.

Tip

Try to take the car for a test drive before you purchase it.

Warning

Read the fine print of the contract that will make you the new owner of a repo car because the contract can include hidden fees, warranty information, and other problems.

Ebay Motors

http://www.motors.ebay.com/

Ezine @rticles: How To Locate Repossessed Vehicles For Sale

http://ezinearticles.com/?How-To-Locate-Repossessed-Vehicles-For-Sale&id=975071

rails

How to Install Wood Hand Rails

Introduction

Deck handrails can serve as decoration for a deck. Handrails can also make the deck safer for people walking down the deck stairs. This project does not require a lot of woodworking expertise. The handrails can be as nice or as unadorned as you like. Make sure you have the proper tools before beginning work. You will be working outdoors so you may want to install the hand rails on a day that has good weather.

Difficulty: Moderately Difficult

Things You'll Need:

- Measuring tape

- Lumber

- Pencil

- Carpenter’s square

- Studs

- Electric miter saw

- Deck screws

- Screwdriver

- Carpenter’s level

Instructions

Step 1

Determine the perimeter of the deck. Write down the measurement. Figure out the amount of short pieces you will need by dividing the perimeter of the deck by how long your piece of your lumber is.

Step 2

Fit two rows of lumber along the perimeter. This will be the bottom and top of the handrail. Work your way around the lumber and draw a mark every 16 inches. Then put the carpenter’s square on top of the marks and pencil in a line across each mark. Draw an “X” by the side of every mark. This is where you will install the studs.

Step 3

Count how many studs you will need and cut the studs that you need to the height that you want your handrail to be. Use an electric miter saw to cut the studs. Don’t forget to add in two extra studs that you will attach the handrail to. These studs will be placed in the corners.

Step 4

Position the studs in the places that you previously marked for them. Attach the studs to the bottoms and tops of the handrail. Use deck screws to attach the studs.

Step 5

Pick the handrails up. Place them in the spot on the deck that needs handrails. Hold them in place with deck screws. Use a carpenter’s level to examine the handrail corners. Also inspect the ends that affix at the house.

Tip

Check out the building codes in your neighborhood so that you can build handrails that meet the town requirements.

Warning

Safety equipment, such as safety goggles, needs to be worn when working with wood.

Floating Foundation Deck System: How to Install a Wood Railing with Posts

http://www.deckplans.com/how-to-install-wood-handrail-posts

movado

How to Recognize a Knock Off Movado

Introduction

Knock of Movado watches are relatively easy to spot. They have a number of flaws that you can look for. Most Movado watch counterfeits are made by foreigners. They are not looked over by any sort of quality control group. Therefore, they have mistakes that you will notice and therefore you will be able to recognize a fake Movado from a genuine Movado watch. These mistakes will include incorrect printing and contamination to the watch itself.

Difficulty: Easy

Things You'll Need:

- Jeweler’s loupe

Instructions

Step 1

Look for spelling and grammatical errors. Most counterfeit Movado watches are made by foreign workers. Therefore, spelling errors are common. Carefully go over all words on the watch because the smallest of mistakes can give the watch away as a fake.

Step 2

Examine the surface of the dial for dust, fingerprints, and hair. There should be none of these on real Movado watches. If you find any dust, fingerprints, or hair, you can be pretty sure that you have found a fake Movado watch.

Step 3

Check the logo. Movado copies may have the logo glued onto the end of the crown. Inspect the crown for signs of uneven edges or glue.

Step 4

Inspect the dial and date wheel with a jeweler’s loupe. All the printing should be clear and sharp. There should not be any fuzzy edges or blending of letters. A watch with any irregular print would never have made it out of the factory.

Tip

A real Movado watch will wind up smoothly. You should not be able to feel movement in the case.

shower

How to Troubleshoot a Showerhead

Introduction

There are two main issues to look for when dealing with a faulty showerhead. Check for a leaky showerhead or a clogged showerhead. Leaky showerheads can occur when there is a worn washer or a break in the connection between the shower arm and the showerhead. When showerhead holes get clogged, water backs up and leaks out. Different shower models can have various problems and solutions so find out what works best for your own specific shower.

Difficulty: Moderately Easy

Things You'll Need:

- Scale remover/white vinegar

- Toothpick/small nail

- Stiff plastic brush

- Plumber’s tape

- New washer

- Wrench

Instructions

Step 1

Find the problem. Leaks can be found at the place where the pipe is screwed into the showerhead. You will also need to check for a clogged showerhead.

Step 2

Unscrew the showerhead in the counterclockwise direction. This might displace lime buildup or rust. Check the threads on the head and the arm for cracks.

Step 3

Clean the head and the arms with scale remover or white vinegar to remove rust. Leave the cleaner to sit on the shower pieces for a few hours. Wait for the pieces to dry completely.

Step 4

If the showerhead holes are clogged, remove the faceplate by unscrewing the screws that secure the faceplate to the head. Soak the faceplate in white vinegar. Leave the faceplate in the vinegar for no less than eight hours.

Step 5

Stick a toothpick or a small nail through each hole in the showerhead. This will remove all buildup from the holes. Use a stiff plastic brush to scour the faceplate. Put the faceplate back into place.

Step 6

Wrap plumber’s tape over the shower arm threads in a clockwise direction. If there is a washer in the shower arm, replacing the washer can also fix leaks. Tighten the showerhead back into place.

Tip

Use a pipe wrench to unscrew stubborn showerheads.

Home Addition Plus: How to Fix a Leaking Showerhead Faucet

http://www.homeadditionplus.com/How%20to%20Fix%20a%20Leaking%20Showerhead%20Faucet.htm

Showerhead Resource: Dealing With a Leaky Shower Head

http://www.showerheadresource.com/dealing-with-a-leaky-showerhead/